Melamine Superplasticizer
MS-F1
Product Description
MS-F1Â is a powder melamine superplasticizer, which can be used in the mortar of cement-based and gypsum-based systems, giving the mortar the following characteristics:
Improve the fluidity of the mortar, reduce the viscosity, and improve the construction.
Low air entrainment and low retardation improve the early strength of mortar.
After the mortar sets and hardens, the surface has a certain gloss.
Range of Application
MS-F1Â has good adaptability in various cement-based and gypsum-based systems, and is widely used in joint fillers, wear-resistant floors, refractories, mold gypsum, GRG gypsum, and prefabricated components.
Recommended Application:
Fluid mortar for pouring
Fluid mortar for paving
Fluid mortar for painting
Fluid mortar for pumping
Steam curing concrete
Other dry mix mortar or concrete
Method of Use
MS-F1Â melamine superplasticizer is added to the powder, and it can be used after mixing evenly. According to performance requirements and application effects, the recommended dosage is 0.3~1.5% of the total weight of the cementitious material.
Physicochemical Property
Item | Parameter |
Appearance | white powder, free flowing |
Bulk density (g/L) | 600-800 |
Moisture content (%) | ≤5.0 |
Water reduction rate (%) | ≤ 0.05% |
Packing Specification
Packed in plastic woven bag, 25 kg/bag.
Storage Conditions
Melamine superplasticizer should be stored in the original packaging in a dry and clean environment, away from heat sources. The product is not prone to failure, but it is a hydrophilic product. If the storage environment is poor, it will slowly absorb water. It is recommended to follow the first-in-first-out principle.
If the product is not used up, the packaging must be tightly sealed to prevent moisture intrusion.
Product Safety
According to dangerous goods and preparations laws and regulations, Melamine superplasticizer product is harmless. Dust formation and accumulation should be avoided. Scattered products should be cleaned up in a dry state. Risk of skidding in contact with water. Please contact us for details.